No Products in the Cart
The Major Tech MT190 is a Circuit Breaker Finder system that operates on energized circuits, and consists of a Transmitter, which plugs into the socket on the circuit you wish to isolate and a Receiver Scanner. The Transmitter sends signals along the cable to the distribution board, the operator simply runs the Receiver Scanner along the circuit breakers or fuses, and the scanner will automatically identify the correct breaker by means of a green LED and a continuous buzzer tone.
An added feature is the convenient chart printed on the Transmitter that helps determine the wiring condition of the socket outlet, based on the LED lights results. Conditions indicated are Correct Wiring, Open Ground, Reverse Polarity, Open Live, Open Neutral and reverse Live and Ground. There is also a 30mA RCD test function built into the MT190 Transmitter.
| FUNCTION | RANGE |
| MCB/Fuse Finding | Identifies MCB or fuse on live circuits |
| Correct Wiring Indication | LED indication green and red |
| Transmitter Function | Connect to mains automatically starts |
| RCD 30mA Test | Yes |
| Frequency Range | 50Hz |
| Display | LED indication on the transmitter |
| Receiver Functions | Three functions, On/Reset/Off |
| Low Battery Indication | Flashing |
| Safety Specs | CAT III 600V |
| Beeper | Steady beep-testing red LED, continuous beep-strong signal Green LED |
| Dimensions Receiver | 196 x 55 x 36mm |
| Dimensions Transmitter | 82 x 51 x 33mm |
| Weight Receiver | 148 g |
| Weight Transmitter | 140 g |
Buy with 100% confidence knowing your purchase is backed by the full Manufacturer's Warranty.
Australia-wide Flat Rate shipping of $15.00 per order.
This includes multiple products up to 5kg only.
Additional cost applies for orders over 5kg. Contact us for quotation.
