Fieldpiece Advanced HVAC Kit

This Cool Tools HVAC-R exclusive Advanced HVAC Kit for air conditioning and refrigeration includes:

• 1 x Fieldpiece VPX7 283 L/M 10 CFM A2L Certified 2 Stage Vacuum Pump - VPX7INT
• 1 x Fieldpiece Recovery Unit - MR45INT
• 1 x Fieldpiece Wireless 4-Valve Digital Manifold with Micron Gauge - SM480vINT
• 1 x Fieldpiece Infrared Refrigerant Leak Detector - DR82
• 1 x Fieldpiece Job Link Charge & Air Test Bluetooth Probe Kit - JL3KH6
• 1 x Fieldpiece Job Link Wireless Manometer Kit - JL3KM2
• 1 x Fieldpiece Wireless Probe Vacuum Gauge with LCD Display - MG44
• 1 x NEW Fieldpiece Wireless Electronic Refrigerant Scale 114KG - SR47
• 1 x Fieldpiece True RMS AC/DC Wireless Power Clamp Meter - SC680INT

FEATURES AND CAPABILITIES

Fieldpiece VPX7 283 L/M 10 CFM A2L Certified 2 Stage Vacuum Pump - VPX7INT

The NEW Fieldpiece VPX7INT high-efficiency Vacuum Pump with RunQuick™ Oil Change System - No Fuss - No Mess

• 10 CFM (283 l/m)flow rate with 15 microns ultimate vacuum
• 3/4 HP DC motor
• RunQuick™ Oil Change System offers on-the-fly oil changes in seconds
• Extra oil bottle storage
• Includes 2 x 237ml Oil filled RunQuick Oil Cartridges
• Backlit oil reservoir to view condition of oil and system
• Water resistant to withstand direct rain
• Patented lightest weight pump
• Port Sizes: (1) 1/4”, (2) 3/8”, (1) 1/2” for easy hose connections
• Sturdy base stays upright
• Small footprint – 1,346 cubic inches
• Quarter-turn gas ballast with LED indicator
• Convenient, removable cord storage
• Error messages: indicate wrong power source or other errors
• Suitable for A2L class refrigerants
• R32, R1234YF, R1234ZE, R512A, 419B, 439A & other 

WHAT'S INCLUDED

• VPX7INT Vacuum Pump
  
• 2 x 8oz RunQuick Oil Containers (Filled)
  
• Operator’s Manual

SPECIFICATIONS

Fieldpiece Recovery Unit - MR45INT

Refrigerant Recycling has never been easier or faster with the MR45INT Recovery Machine

• Dual cylinder compressor with long life and low friction with ceramic lined cylinders

• Auto Shut Off when -10 Kpa reached
• Protected from voltage drop (runs as low as 190 VAC)
• Single dial self purge
• Twice the RPMs (3,000) and twice the horsepower (1HP - 0.745kW) with DC Motor
• Extra large condenser cools faster, especially on hot days
• Light Weight at only 10 Kgs
• Water & Rain resistant
• Easy access ports
• Easy hose connections and built-in power cord storage                          
• Large backlit display with status messages
• UL Verified to Section 608 of EPA Clean Air Act
• UL Verified to AHRI Standard 740
• A2L ready including R32
• Also can be used for transferring SF6 (sulfur hexafluoride) a non-flammable gas used in electrical components.

WHAT'S INCLUDED

• MR45 Refrigerant Recovery Machine
  
• 10 Extra Mesh Screens for Input Port
  
• 3 Extra O-ring for Input Port
  
• Operator’s Manual

SPECIFICATIONS

Fieldpiece Wireless 4-Valve Digital Manifold with Micron Gauge - SM480vINT

The newly designed Fieldpiece Manifolds are stronger and more robust than ever before!

Data Logging
• Stores up to 9 jobs internally
• Easy download via USB port
• Displays % free storage space before logging begins
• Logs up to 7 days (168 continuous hours)

Tightness Test built-in feature
• Check for leaks after repairs or installations
• View pressure differential over time
• Timer tracks duration of test
• Temperature compensated with SL temp to avoid false positives

Customisable Menu
• Adjust auto power off duration
• Adjust backlight duration
• Set high and low vacuum alarms
• Select each unit of measurement individually

Receives Wireless Measurements
Add Job Link Tools to your arsenal and get live readings directly on the SMAN manifold screen from the Job Link Psychrometers (JL3RH), Job Link Pipe Clamps (JL3PC), and SRS3 Refrigerant Scale.
Place pipe clamps in the perfect location. Monitor and record live refrigerant usage for precise recovery, charging, and documentation. View live air measurements and calculations while making adjustments.

Increase Professionalism with Job Link® System App
Streamline and simplify your call even further with the Job Link System App. See your measurements up to 100 metres away on your mobile device. Document your work and provide professional reports, including refrigerant weight usage, by simply connecting to the Job Link System app. Helps to reduce call-backs and increase profits.
• View measurements on SMAN and/or in Job Link App
• Monitor and record refrigerant weight
• Direct 100 meter wireless range (no transmitter needed)

WHAT'S INCLUDED

• SM480vINT
  
• 2 x TC24 Wired Type-K Pipe Clamp thermocouple
  
• 1 x ATA1 Type-K Bead Thermocouple with clip
  
• 1 x ANC11 Padded Drawstring Case

SPECIFICATIONS

Fieldpiece Infrared Refrigerant Leak Detector - DR82

Infrared Refrigerant Leak Detector for HVACR - Superior Sensitivity in a Rugged Design for HVACR

• 10-year sensor life
• Doesn’t trigger on soap bubbles and oil
• Compact – designed to fit in your hand
• Multiple alarms
• LED lighted tip and loud beep help find leaks in noisy and dark environments
• Sensitivity better than 0.03 oz/yr (1g/yr)
• Ruggedized and IP54-certified
• 10-hour battery charge
• Bright blue, back-lit LCD screen with clear numerical leak size indicator and bar graph
• Non-conductive, sturdy probe that stays where you want it.
• Weighs less than a pound
• Works on A2L Refrigerants

WHAT'S INCLUDED

• Advanced IR Refrigerant Leak Detector (DR82)
  
• 5 x Replacement Filtered Tips (RFT6)
  
• Wall Charger with USB-C Cable (RCA3)
  
• Blow-Molded Case (ABM2)
  
• Operator’s Manual

SPECIFICATIONS

Fieldpiece Job Link Charge & Air Test Bluetooth Probe Kit JL3KH6

Take a full system snapshot quickly and easily with the JL3KH6 Charge and Air Test Kit.

• All measurements can be sent up to 1000’ away directly to your mobile device with the Job Link® System mobile app. 
• Each tool is designed for agility and speed.
• The pressure probes fit into tight spaces.
• The pipe clamps use the new Rapid Rail™ sensor design delivering accuracy, speed, and agility, even on the most awkward pipe configurations.
• The psychrometers’ flexible narrow probes and configurable magnet make it easy to measure supply plenums, ducts, and elevated registers. Do more with Job Link probes!

WHAT'S INCLUDED

• 2 x JL3PR Job Link Pressure Probes for Discharge & Suction Pressure
• 2 x JL3PC Job Link Premium Pipe Clamp Probes for liquid line subcooling & suction line Superheat
• 2 x JK3RH Flex Job Link Psychrometer Probes for obtaining Dry Bulb, Wet Bulb, Dew Point Temperatures & Relative Humidity [ RH%]
• Contained in a quick access padded ANC18 Protective Case
• 2 x AAA Batteries Per Probe (8 Total)

SPECIFICATIONS

Wireless Range: +300 metres
Wireless Frequency: 2.4 GHz
Battery: 2 x AAA (included)
Battery Life: 150 hrs typical alkaline
Auto Power Off (APO): 2 hrs (can be disabled)
Minimum Device Requirement: BLE 4.0 devices running iOS® 7.0 or AndroidTM 5.0

Job Link™ Pressure Probe - JL3PR
Connector Type: 45° Standard 1/4” NPT female flare
Best Accuracy: ±1 psig (±7 kPa)
Measurement Range: 0 to 580 psig (0 to 4000 kPa)
Maximum Overload: 800 psig (5500 kPa)
Water Resistant: Designed to IP55

Job Link™ Premium Pipe Clamp Probe - JL3PC
Pipe Compatibility: Electrically conductive 1/4” to 1 3/8” (6.4mm to 34.9mm) dia.
Accuracy: ±1°F (±0.6°C)
Measurement Range: -50°F to 257°F (-46°C to 125°C)
Stabilization Time: 3 seconds typical
Measurement Feedback: Beeper and LED
Water Resistant: Designed to IP55
Patent: Pending

Job Link™ Flex Psychrometer Probe - JL3RH
Flexible Probe: 0.36” (9mm) diameter, 9.25” (235mm) length
Best Accuracy: ±1°F (±0.6°C) ±2.5 %RH
Measurement Range: -4°F to 140°F (-20°C to 60°C) 0 %RH to 100 %RH

Fieldpiece Job Link Wireless Manometer Kit JL3KM2

The revolutionary new JL3KM2 Job Link® System Manometer probes give HVAC-R pros the freedom to work the way they want to — unrestricted by hoses, so technicians get readings from optimal locations on every system, every time.

• All-in-one static, gas and draft pressure
• Record up to 8 readings at once* in Job Link App
• Accurate and stable measurements
• Reliable pressure regardless of location
• Individual pressure readouts
• Switchable P1 – P2 indicator
• Easy zero to atmosphere
• Long-range wireless
• Job Link® System app compatible

WHAT'S INCLUDED

• 2x JL3MN Manometer Probe
• 2x ASP2 Static Pressure Probe and Hose
• 2x Brass Screw Fitting with Extra Hose
• 2x Slide Gas Adapter
• 4x AAA Batteries
• 1x Padded Case

SPECIFICATIONS

Fieldpiece Wireless Probe Vacuum Gauge with LCD Display - MG44

The NEW MG44 Micron Gauge Impact and Weather Resistant designed for the field

• Confidently perform evacuations with a reliable, leak-proof seal.
• Reversible angled coupler and new cylindrical design are easier to fit into tight spaces.
• There are three ways to use:
• View from up to 300 metres away (line of sight) via the Job Link® mobile app
  
• View on the Fieldpiece SMAN™ Refrigerant Manifold SM380INT or SM480INT
  
• View direct from the MG44’s display
• Three ways to view the new larger backlit LCD screen is easier to read and its dot-matrix display shows more info including:
• bar graph
  
• rate
  
• rate meter
• IP54-rated weather-resistant.
• Rugged over-molded construction for extreme impact resistance.
• Range 50 to 25,000 microns
• Units of measure: microns (µm) of mercury, mmHg, mbar, mTorr, Torr, and Pascals

WHAT'S INCLUDED

• Micron Vacuum Gauge - MG44
  
• Reversible Coupler Fitting
  
• Operator's Manual
  
• 2 x AA Alkaline Batteries

SPECIFICATIONS

Fieldpiece Wireless Electronic Refrigerant Scale 114KG - SR47

The New Heavyweight Champion

• 13″ platform to fit larger tanks and integrated bumpers for increased durability
• Strong enough to hold a maximum load of 252 lbs
• Wireless remote control with LED backlight – can be stored inside the scale, and makes viewing data easy
• Industry-leading accuracy: ±0.03%rdg + 0.25 oz
• Lightweight. Total weight of scale and remote is ~7 lbs
• Water resistance can handle any job site
• Connects to the Job Link® System App with 1000′ wireless range and Digital Manifolds SM480V & SM380V
• Platform battery lasts 200+ hours – it can literally work all week if needed
• Easy-to-use raised power button now located at base of scale
• A2L compatible

Built for HVAC-R - Packed with ideal measurements perfect for mini-splits!

Whether you’re working on small circuitry in mini-splits or on large commercial units, the new SC680 is packed with everything you need to install, service or troubleshoot any HVAC-R system.

• Measures Power (kW) for system efficiency
• Verify 3-phase rotation with just two leads.
• Filter out noise to get true voltage and frequency with low pass filter
• Take more accurate VAC and AAC readings with True RMS
  
• Has True RMS and Low Pass Filter (LPF) to obtain accurate VFD readings
• Test Diodes and Resistance up to 50MΩ
• Measures start/run capacitors
• Magnet for mounting meter during use
• Molex tips reach into power connectors
• Safety rated CAT IV-600V/CAT III-1000V

WHAT'S INCLUDED

• SC680INT Bluetooth Clamp Meter
• ADLS2 Deluxe Test Lead Set with Gold Plated Tips with Removable Sheath
• ASA2 Short Leads with Alligator Clips
• 2 x ATB1 Type K Thermocouples
• 2 x Velcro Straps
• 9V Alkaline Battery (not installed)
• ANC7 Padded Case
• Operator's Manual

SPECIFICATIONS

Please operate the instrument following all instructions of the operator's manual to avoid impairing the safety of the product.

WARRANTY

1 Year from Date of Purchase (​excludes Consumables such as Filters, Gaskets, Leads, Batteries, Fuses, Sensors, Case etc)

Australia-wide Flat Rate shipping of $15.00 per order.
This includes multiple products up to 5kg only.

Additional cost applies for orders over 5kg. Contact us for quotation.