No Products in the Cart
The thin humidity/temperature probe is suitable for measuring temperature and relative humidity in storerooms and workrooms. The exceptionally small diameter of 4 mm also makes it possible to measure in small holes and narrow passageways.
The thin humidity/temperature probe can be installed for long-term measurements. The probe can be installed using a PG gland or clamp, for example (not included in delivery).
The humidity sensor for measuring relative humidity is long-term stable, condensation-resistant and traceable to international humidity standards, such as ILAC, PTB and NIST. Thus, even after years of use, you can still count on measurement results that are reliable and correct.
| General technical data | |
| Length probe shaft tip | 65 mm |
| Diameter probe shaft tip | 4 mm |
| Temperature - NTC | |
| Measuring range | 0 to +40 °C |
| Accuracy | ±0.2 °C |
| *Please also take into account the device uncertainty. | |
| Humidity - Capacitive | |
| Measuring range | 0 to +100 %RH |
| Accuracy | ±2 %RH at +25 °C (2 to +98 %RH) |
| ±0.08 %RH/K (k=1) | |
| long-term stability: ±1 %RH / year | |
| *The sensor accuracy corresponds to the system accuracy. | |
Buy with 100% confidence knowing your purchase is backed by the full Manufacturer's Warranty.
Australia-wide Flat Rate shipping of $15.00 per order.
This includes multiple products up to 5kg only.
Additional cost applies for orders over 5kg. Contact us for quotation.
