No Products in the Cart
With the small lux and UV probe (28 x 56 x 15 mm), you can reliably monitor light-sensitive exhibition objects both in the exhibition room and in display cabinets.
Monitor light-sensitive exhibition objects discreetly (with the corresponding data logger): with the digital lux and UV probe with plug-in cable.
The supplied cable (length 0.6 m) can, if required, be replaced with a longer cable (length 2.5 m) (please order separately). Multiple cables can be combined up to a length of 10 metres.
Applications for the lux/UV probe
The lux and UV probe is ideal for use in museums, galleries and other exhibition venues. Use the accurate lux and UV probe (with the corresponding data logger) to monitor the amount of light and UV radiation to which exhibits are exposed.
Intelligent calibration concept
The lux and UV probe offers maximum digital measurement reliability. As the processing of measuring values is carried out directly in the probe, the quality of the measurement is not affected by the length of the connecting cable between the WiFi data logger and the probe. The probe can be sent in for calibration on its own (without the data logger).
| Sensor | ||
| Measurement parameter | Light | UV |
| Measuring range | 0 to 20000 Lux | 0 to +10000 mW/m² |
| Accuracy |
DIN 5032-7 Class C-compliant ±3 Lux or ±3 % of mv (refers to reference DIN 5032-7 Class L) |
±5 mW/m² or ±5 % of mv (refers to external reference) |
Buy with 100% confidence knowing your purchase is backed by the full Manufacturer's Warranty.
Australia-wide Flat Rate shipping of $15.00 per order.
This includes multiple products up to 5kg only.
Additional cost applies for orders over 5kg. Contact us for quotation.
