No Products in the Cart
The stub probe is suitable for air temperature measurements and also for temperature measurement in liquids and pastes. Thanks to its NTC sensor element, the probe provides precise temperature measurements with an accuracy of up to ±0.2 °C.
Protection class IP 54 means that the stub probe is splash-proof.
The temperature probe featuring a rounded tip has a short probe tube which is 35 mm in length.
This probe's response time t99 (the time it takes for the probe to register 99% of the jump in temperature) of 15 seconds refers to measurements in moving water at +60 °C. This response time is extended when, for example, measurements are taken in still liquid, pastes or air.*
*For air temperature measurements, the response time is about 40 – 60 times higher than the indicated value measured in water. If you should require a rather sluggish temperature probe to measure air temperature, this probe is particularly suitable because it does not take brief temperature peaks into account at all, or only to a very small degree, when measuring temperature. For example, if you are planning to use this probe to measure air temperature in the refrigerator, briefly opening the refrigerator door would not take into account the temperature fluctuation which results from mixing the warm room temperature with the refrigerator temperature.
Note: If you need an air temperature probe with a fast response time, your best choice would be the exceptionally fast temperature probe 0602 0493 which has a large measuring range.
Buy with 100% confidence knowing your purchase is backed by the full Manufacturer's Warranty.
Australia-wide Flat Rate shipping of $15.00 per order.
This includes multiple products up to 5kg only.
Additional cost applies for orders over 5kg. Contact us for quotation.
